Ultra High-Pressure Hydraulic Products, Hose Assemblies

Hose 180 MPa, DN 5

The CEJN High-Pressure hose is a spiralized steel reinforced polymer hose that picks up where conventional product capabilities stop. It gives you ultra-high working pressure with maintained flexibility through entire life. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. A long-lasting service time and extended hose life in even the toughest applications is a result of the kink-resistant steel-reinforced construction, abrasion-resistant covers and a superior chemical resistance. The small outside diameter makes the hose ideal for tight routing.

Hose 180 MPa, DN 5
Hose Part No. Description
  19 951 1801 199511801Blue


End Connections Part No. Description
  19 951 1830 199511830G 1/4" male + sealing cone (60°) int. (recess for Tredo ring* 19 950 0083)
 19 951 1831 199511831G 1/4" male + flat end for copper washer (09 950 4600) and recess for USIT ring** (19 950 0084)
 19 951 1832 199511832G 1/4" male + 100° ext. sealing cone (for CMS* 120°).
 19 951 1833 199511833Sealing cone universal (24/60°) ext. + G 1/4" female swivel nut
 19 951 1835 199511835Sealing cone (60°) int. + 9/16"-18 UNF female swivel nut
 19 951 1836 199511836Sealing cone universal (24/60°) ext. + M14 x 1.5 female swivel nut
 19 951 1838 199511838Sealing cone (58°) ext. + M12 x 1.5 female swivel nut
 19 951 1839 199511839Sealing cone (58°) ext. + M14 x 1.5 female swivel nut
 19 951 1871 199511871G 1/4" male + 100° ext. sealing cone (for CMS* 120°). Stainless steel.
 19 951 1872 1995118721/4"-28 UNF left hand + sealing cone (58°) ext. Stainless steel tube.
 19 951 1873 199511873Sealing cone type M + 9/16"-18 UNF female swivel nut. Stainless steel.
 19 951 1875 199511875Sealing cone universal (24/60°) ext. + G1/4" female swivel nut. Stainless steel
 19 951 1876 1995118763/8”-24 UNF left hand + sealing cone (58°) ext.


Accessories Part No. Description
  19 951 1880 199511880Protection hose PVC DN18
 19 951 1882 199511882Firesleeve Protection hose
 19 951 0008 199510008CIS programable NFC tag


Seals Part No. Description
  19 950 0083 199500083Bonded seal 1/4" parallel male thread (tredo/dowty) suitable for 199511830 and other connections
 19 950 0084 199500084Bonded seal 1/4" parallel male thread (USIT ring) suitable for 199510731, 199511831 and other connections
 09 950 4600 099504600Copper washer


*Sealing with Tredo ring is not recommended above 150MPa **Sealing with USIT ring is not recommended above 100MPa. Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Design: Inner tube of polyoxymethylene (POM), 4 spiral layers of high tensile steel wire, outer sheath of polymide (PA)
ID x OD: 4.8 x 11.6 mm
Max. working pressure: 180.0 MPa
Min. burst pressure: 450.0 MPa
Min. bend radius: 130 mm (5.1")
Weight: 280 g/m (9.9 oz)
Temperature range: -40°C — +100°C (-40°F — +212°F)

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN. By submitting this form you may recieve e-mail send-outs. You can unsubscribe from them at any time.