Ultra High-Pressure Hydraulic Products, Hose Assemblies
Hose 140 MPa, DN 4
The CEJN High-Pressure hose has two layers of close spiralized and two layers of open spiralized high tensile steel wire, bonded with a special adhesive. This reinforced polymer hose picks up applications where its small diameter and flexibility are required. It gives ultra-high working pressure with maintained flexibility through entire life. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. A long-lasting service time and extended hose life in even the toughest applications is a result of the kink-resistant steel-reinforced construction, abrasion-resistant covers and a superior chemical resistance.
| Hose | Part No. | Description |
| 19 951 1401 199511401 | Black | |
| End connections | Part No. | Description |
| 19 951 1432 199511432 | G 1/4" male + 100° ext. sealing cone (for CMS* 120°). | |
| Accessories | Part No. | Description |
| 19 951 1580 199511580 | Protection hose PVC | |
| 19 951 1882 199511882 | Firesleeve Protection hose | |
| 19 951 0008 199510008 | CIS programable NFC tag | |
| Technical data | |
| Inner tube of polyamide, 2 spiral layers and 2 open spiral layersof ultra-high tensile steel wire, outer sheath of polyurethane | |
| 4,0 x 9,7 mm | |
| 140.0 MPa | |
| 350.0 MPa | |
| 55 mm (2.2") | |
| 160 g/m (5.6 oz) | |
| -10°C — +70°C (14°F — +158°F) | |